Cyclone Latest NewS & Update (strictly for updates only)

12-01-2011 Cyclone Server Update

Hi, our server was updated, we decreased post-processing SL3 COD file time. Now, after upload COD file, you should get Level 7 code shortly after 20-30 seconds (up to 1-2 mins). I think this will help for many ppls as I see more and more COD files being uploaded every day

This is server-side update, no need to download nothing.

Stay tuned

Cyclone DEMOLITION! XGold1 Unlock/RPL, XGold2 Flash/RPL, W7 64bit, New log2cod, more.

Installer v1.11 is Ready.

What's new ?
=====================
Installer v1.11
07.03.2011
=====================

* New BB5 FBUS/USB Loaders v10.48.1 introduced
* DCT4/BB5 Product/Variant caching added. Saves lot of time when selecting correct Datapackage. This is done automaticcly. During Deletion or Installing some of DP, cache is rebuilt automatically on user demand.
* XGold2 USB Flashing Introduced (C1-01,C1-02,C2-00,...)
* Added XGold2 RPL Backup (including CCC,HWC,NPC,Simlock) FIRST in the world. The backup is created automatically during flash.
* Added XGold2 RPL Write (CCC,HWC,NPC and Simlock) seems FIRST in the world. In order to write RPL file, you need flash your phone and add RPL file as secondary flashing Image (Add XGold2 RPL button).
* XGold2 RPL Contains FULL phone security, possible to Full restore after Flash Chip change
* Added XGold1 Unlocking by Reading LOG2COD Log file
* Added XGold1 Low-Level PM Dumping (both Secured and Nonsecured areas), seems 1st in world
* Added XGold1 Low-Level RPL Backup, seems 1st in world
* XGold1 Backed-up RPL file might be used to completly Re-Initialize phone security, i.e. after flash-chip change (RPL Contains IMEI and Simlock Block), seems 1st in world...
* Both XGold1 Low Level dumps support dead phones (phone might be dead, Cyclone will binary dump PM from flash chip directly)
* Added XGold1 Low-Level Deleted PM Keys dumping (extra option-don't write back readen PM file with deleted keys, they are ASCII marked as deleted ones). Support deleted messages, contacts, ..., seems 1st in world
* Added XGold1 FBUS/Keyboard SL Bad Entries Counter reset, seems 1st in world
* Reading XGOLD1 LOG2COD is fully standalone, seems 1st in world
* XGold1 Unlock/RPL supported mobiles: 1616, 1280, 1208, 1209, 1800, C1-00, and others...
* Added "Mapped At" FlashChip information during XGold Flashing, when possible
* Added "Sector Size" FlashChip information during XGold Flashing, when possible
* No reboot flashing for XGold added
* APE block flashing fixed for various RAPIDO mobiles
* Fixed Old Protocol (Dead) USB Flashing (RAPIDO phones: N86,etc)
* Fixed Blackberry Module upon reading MEP via USB it was placing it on wrong window
* Assigned COD files are now verified before sending to server, the auxiliary verification also takes place at Server Side
* Fixed OpenDialog filter when adding DCT4/BB5 flash file
* log2cod: v1.1 Released
* log2cod: GPU Selftests added (some GPU find bad code, or didn't find anything at all)
* log2cod: Added Ivan Golubev EULA
* log2cod: Added Queue managment
* log2cod: Code Verification added after successfull calculation
* log2cod: Console is cleared after some salts processed in order to avoid overflow
* log2cod: PeekNamedPipe() problem fixed
* log2cod: Added queue processing in loop mode (you can add new jobs during calculation)
* The transaction bar have been a bit resized
* Cyclone Box HW Rev B11x, C11x added
* Models.ini updated
* Box USB Drivers updated to v1.0.0.6 they are digitally signed now, no more problems on Win7 / Win Vista x64
* COM Emulation Service Driver updated to v1.0.0.1 it is digitally signed now, no more problems on Win7 / Win Vista x64
* Main Software is now Digitally Signed (Authenthicode)
* log2cod is now Digitally Signed (Auhtenthicode)
* Cyclone Calculator is now Digitally Signed (Authenthicode)
* Installer is now Digitally Signed (Auhtnethicode)
* New phones added to Virgin SX4 Database
* New phones added to Security Database (Virgin RPL)
* Box Firmware v1.53 Released
* Some minor and major changes and bugfixes
* Versions snap
* Installer v1.11
* Main x86 Application v1.0.0.11003
* x86 Memory Manager v4.76.0.179
* Native USB Drivers v1.0.0.6
* USB-COM Stack Drivers v1.0.0.1
* Onboard Secure Bootloader v2.13
* Onboard Main Nokia Application v1.53
* Onboard COM Emulation Code v1.00
* Onboard Security Card Revision v1.10
* Nokia Connectivity Cable Drivers 7.1.34.0
* BB5 USB/FPIF Single Line/FPIF DualLine v20110301
* DCT4 FPIF Single Line/USB v20100410
* DCT4 Unlock Patches DEPRECATED
* Communication Stack SSLv3-keys-06092008
* Skin Stack v7.21
* Box Firmware v1.53 is needed.



Download Link
http://www.karwos.hk/CycloneBoxInstaller.exe

ps1. yes, germany support server HDD is physsicly crashed.. it will be back in few days.. hope with noncorrupted content.
ps2. be prepared for more standalone&HOT things these days
ps3. new drivers included in this package are ONLY compatible with this new version. Don't try using them on older builds and vice versa !

Best Regards,
Cyclone Team

http://forum.gsmhosting.com/vbb/f528...-more-1221786/
__________________

Cyclone Standalone Unlock/SX4 Auth/SD Keys repair for 6700,E52,E55,E72,X3,.. added

Hi, new update for Cyclone box is avaiable.

- Added SP unlock via server / log2cod reading
- Added standalone SX4 auth
- Added standalone Superdongle Keys Repair
- Supported phones:
- RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
- RAP4 Based: 3710, 5330, 7230, 6303i, X3

All is free and standalone Box firmware upgrade to v1.54 is needed.

Download Link: http://www.karwos.hk/Cyclone_RAPU_RAP4_Unlock.rar - please extract to your current Cyclone box directory...
Installer link: http://www.karwos.hk/CycloneBoxInstaller.exe

More will come next week .. or tihs week. who knows

Ps1. Please install installer v1.11 first (this one releaesed yesterday!)
Ps2. dont forget to upgrade drivers! Else you will get "Security problem #5"

Best Regards,
Cyclone Team

original link http://forum.gsmhosting.com/vbb/f475...added-1222790/
__________________

paanu ba i update ang driver!!!

eto gawin nyo..

1. Run mo system properties
2. In hardware TAB click device manager
3. Go to Universal Serial Bus Controllers
4. Right Click CYCLONE BOX
5. Browse the new driver that included in the new installer package update v1.11 of cyclone.
Ex. C:\Program Files\Cyclone Box\ Drivers

Hi, new installer is ready.

=====================
Installer v1.12
09.03.2011
=====================
- Firmware v1.55 introduced - RAP4 CMT Booting (Wrong first char) fixed
- Added SP unlock via server / log2cod reading
- Added standalone SX4 auth
- Added standalone Superdongle Keys Repair
- Supported phones:
- RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
- RAP4 Based: 3710, 5330, 7230, 6303i, X3
- Minor changes and bugfixes

Download Links : http://www.karwos.hk/CycloneBoxInstaller.exe


In case of RAP4 mobiles make sure you are using cables with:
1) *******ted MBUS line 2) Digital ground connectet to analog 3) most possible short, without adapter

Else - you will get booting problems.

Best Regards,
Cyclone Team

Cyclone Box v1.57 1st in world ORIGINAL RPL BACKUP and SD BACKUP for RAPU/RAP4/RAPID

Hi, new firmware for Cyclonebox is Avaiable.

- Added PM308 decryption for NEW phones (RAPU , RAP3Gv4, RAPIDO New ), that means you can:
- Superdongle Key backup
- CMLA Key backup
- Correct Phone Security Analysis for this phones
- Correct MCU/DSP timestamps analysis
- Phone auhtorization without corrupting SD key, when SD key is correct
- After local SX4 auth , phone STILL MIGHT BE authorized with ORIGINAL NOKIA SX4 CARD
- Created RPL from RAPU/RAP4 phones are now 100% like delivered from Nokia! That means after full erase and writing back backed-up RPL, your phone STILL MIGHT BE AUTHORIZED WITH ORIGINAL SX4 CARD - no security issues !
- Created RPL from RAPU phones might also SAVE PHONE from DESTROYING by some other tools (Contact Service after upgrade to latest versions...)
- Minor changes and bugfixes

This is firmware-side update only, upgrade your box firmware to v1.57 and use latest installer v1.12


Created RPL with FULL NOKIA CONTENT (SD, CMLA, ...)


Code:

RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-469_355216039314532_2011-03-10_130535.SecurityBlock.PM"
"1BB0020A296303443292389F545846C201100A5C.C0003160 " Exists, That is good...
Storing Additional Data...
Checking Superdongle Key...
Encrypting Superdongle Key...
Storing Superdongle Key...
Checking CMLA Key...
Storing CMLA Key...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 1BB0020A296303443292389F545846C201100A5C
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC: 3E273BF6
CMT_SECURE_ROM_CRC: 37BE26FA
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
Restarting MCU...
RPL Saved OK


Example seccurity analysis, timestamp analysis, etc for RAPU

Code:

Started Reading MCU & DSP Timestamps...
MCU Version V ICPR82_09w46.8
MCU Date 30-03-10
Product RM-469 (Nokia E52)
Manufacturer (c) Nokia
IMEI 355216039314532
Mastercode 2637612627
Reading Security Block...
Security block OK and saved to "RM-469_355216039314532_2011-03-10_130314.SecurityBlock.PM"
"1BB0020A296303443292389F545846C201100A5C.C0003160 " Exists, That is good...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 1BB0020A296303443292389F545846C201100A5C
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC: 3E273BF6
CMT_SECURE_ROM_CRC: 37BE26FA
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Reading MCUSW...
Reading DSP0...
Restarting MCU...
------ SECURITY BLOCK TIMESTAMPS ------
Timestamp Slots Detected: 4
Timestamp[1] "AENO", 2010-02-19 11:11:38
Timestamp[1] Hash "0BCD489612D4A4968B4D42A5631FC85C5D7E0E81"
Timestamp[1] Factory MCUSW Timestamp 1970-01-01 02:00:00
Timestamp[1] Dejan Hack Detected
Timestamp[1] ValidAfter Factory MCUSW Test Passed OK!
Timestamp[2] "CMCU", 2010-04-02 11:57:08
Timestamp[2] Hash "4CC50641D7C45E9DFE2967D4802C8710547BF54A"
Timestamp[2] Factory MCUSW Timestamp 2009-09-02 15:18:02
Timestamp[2] ValidAfter Factory MCUSW Test Passed OK!
Timestamp[3] "CDSP", 2010-04-02 11:57:07
Timestamp[3] Hash "D8C94BFA607710D856D8C78A9CE3EB411CD7AC4C"
Timestamp[3] Factory MCUSW Timestamp 2009-09-02 15:18:02
Timestamp[3] ValidAfter Factory MCUSW Test Passed OK!
Timestamp[4] "AMCU", 2010-04-02 11:57:09
Timestamp[4] Hash "BFC854388C2C26014F05B5084A8033CB30E472EB"
Timestamp[4] Factory MCUSW Timestamp 2009-09-02 15:18:02
Timestamp[4] ValidAfter Factory MCUSW Test Passed OK!
-------------------------------------
------ ACTUAL FLASH TIMESTAMPS ------
MCUSW Timestamp 2010-04-02 11:57:08
Flash MCUSW Timestamp synchronized with Security Block MCUSW Timestamp OK!
DSP Timestamp 2010-04-02 11:57:07
Flash DSP Timestamp synchronized with Security Block DSP Timestamp OK!
-------------------------------------
Finished, MCU and DSP Timestamps looks good!
Started Phone Security Analysis...
MCU Version V ICPR82_09w46.8
MCU Date 30-03-10
Product RM-469 (Nokia E52)
Manufacturer (c) Nokia
IMEI 355216039314532
Mastercode 2637612627
Reading Security Block...
Security block OK and saved to "RM-469_355216039314532_2011-03-10_130516.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
"1BB0020A296303443292389F545846C201100A5C.C0003160 " Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!

Best Regards,
Cyclone Team

orig link http://forum.gsmhosting.com/vbb/f475...rapid-1224113/
__________________